Greatly reduce the amount of labor associated with a typical gaylord unloading station. A typical gaylord unload station utilizing a gaylord tilter, really needs a lot of attention, and it uses quite a bit of floor space.
Think about some of the problems typical with a gaylord tilter:
- A fair amount of floor space above and beyond the size of the gaylord
- It requires a fork truck to load and unload the tilter
- Pinch points on the tilter
- The material “rat holes” and requires attendance to move the naterial and the material wand around
- If someone is not tending the gaylord, the machine can run out of material
The Novatec / Maguire Sweeper addresses all of these issues
- Very little floor space is taken up beyond the size of the gaylord
- You can use a hand pallet jack to move gaylords in and out
- No pinch points
- No tending of the gaylords required
|
The Dual Sweeper automatically switches from empty container to full adjacent container – without interrupting flow of material.Allow more time for changing over the empty bin for a full bin with the Dual Sweeper |
|
